 |
|||||
|
|
|
Software Upgradation for ORION DVD Player 2602 |
|||
|
|
Procedure for upgrading software for DVD 2602 (Updated on June 1, 2005) 1. Download the following file to your computer. 2. While there is no CD in the DVD (No Disc Mode) , press “Menu 1 3 5 7” buttons on the remote control in order to reach the Service Menu of DVD Player: MENU → 1 → 3 → 5 → 7 2.1. Note the software version described as “b.xx “ to be able to compare the sw. Version after update process. 3. Burn the update file by Nero program with below set up. ISO 9660 → ISO LEVEL 1 → MODE 1 → NO Multisession → Joilet OFF → Finalize ON 4. After burning process is completed, place the update CD into the DVD tray and press play button. 5. Wait to see the update process steps as shown below. When the sw. Update is completed unit will switch itself to standby mode. LOADING → READING → ERASE → WRITING → DONE 6. Finally, press the eject button and take out the update CD while DVD Player remains at stand by Mode. 7. Updating process has been completed. To check whether it is updated correctly or not, repeat the first step for comparing software version 8. If the previous and letter names are different, CD is update has completed successfully. If the name remains same than go through the steps from the beginning. IMPORTANT NOTE: If the AC source breaks down while the updating the unit (main board) will be totally out of order. This kind of units/boards is out of Warranty.
|
||||
|
Marketing & Distribution for other companies
|
|||||
|
Copyright © 2009 Orion Electronics Ltd, Hungary. All rights reserved. |
|||||
